NEC Express5800 1160Xd User Manual page 100

cmd arg1
ncconn -
xbcx
iors
iors
ncdis -
xbcx
iors
led -
clkx
xbcx
3-44 Service Processor
Table 3-35 HC Subcommands (cont'd)
arg2 arg3 arg4
- - -
nciy iors ncit
ncit xbcx nciy
ncit ioru nciv
- - -
nciy - -
ncit
- -
- - -
on|off - -
on|off - -
Description
Used to set connection information of the 1.6G
cable.
Displays Help for "ncconn" when the argument
is omitted or an error is made.
This subcommand can be executed when all
partitions are in the DC POWER OFF state.
Specifies the connection between the 1.6G port
with the port number y in the XBC Board with
the physical number x and the 1.6G port with
the port number t in the IOR Daughter Board
with the physical number s.
Specifies the connection between the 1.6G port
with the port number v in the IOR Daughter
Board with the physical number u and the 1.6G
port with the port number t in the IOR Daughter
Board with the physical number s.
Used to disconnect the 1.6G cable.
Displays Help for "ncdis" when the argument is
omitted or an error is made.
This subcommand can be executed when all
partitions are in the DC POWER OFF state.
Removes the connection of the 1.6G port with
the port number y in the XBC Board with the
physical number x.
It is linked to the disconnection of the
corresponding NC1/NC2 Board/IOR Daughter
Board port (and vice versa).
Removes the connection of the 1.6G port with
the port number t in the IOR Daughter Board
with the physical number s.
It is linked to the disconnection of the
corresponding NC1/NC2 Board/IOR Daughter
Board port (and vice versa).
Used to turn on/off a component's LED to
identify its location.
Displays Help for "led" when the argument is
omitted or an error is made.
Turns on/off the LED of the CLK Board.
"x" is the physical CLK Board number (0-1).
Turns on/off the LED of the XBC Board.
"x" is the physical XBC Board number (0-3).