Notes For Os Installation; Efi Device Path - NEC Express5800 1160Xd User Manual

4. Start the OS loader by entering the directory file name, in this example,
setupldr.efi
fs0:\> cd os
fs0:\os> ls
Directory of fs0:\os
03/13/00 05:44p <DIR>
03/13/00 05:44p <DIR>
12/22/99 00:58p
fs0:\os> setupldr
Figure 2-13. Starting the OS Loader from Shell

Notes for OS Installation

See the following notes requiring attention when installing the OS:
!
Adding a SCSI card to a free slot and connecting a disk to the SCSI card
after the OS installation, might change the numbering of the disk and
prevent an OS boot from that disk.
!
PCI14 slot is set to not run the Option ROM BIOS as default. Running
the Option ROM BIOS on the PCI114 slot requires changing the settings
of the slot with BIOS setup before booting the OS.

EFI Device Path

Each device installed in the system is managed with an "EFI Device Path." The
following information describes EFI device paths.
See the following examples and Table 2-2 for device path formats for devices
conforming to EDD3.0 specification:
Example: SCSI cards and disks installed on the PCI bus:
Acpi(PNP0A03, 1)/Pci(2|0)/Scsi(Pun0,Lun0)/HD(Part1,SigFF050000)
Example: DVD-ROM device connected to the IDE Secondary channel:
Acpi(PNP0A03,0)/Pci(2|1)/Ata(Secondary,Master)/CDROM(Entry1)
, at the fs0:\os prompt and press
2,048 .
512 ..
r 635,392 setupldr.efi
1 File 635,392 bytes
2 Dirs 2,560 bytes
Start OS Loader.
Enter .
System Operation 2-17