System Configuration (Setup) - NEC Express5800 1080Xd User Manual

USERS_GUIDE_1080XD_hw
1.4.9

System Configuration (SETUP)

SETUP is a utility tool to set the setting of the basic hardware. You can use this utility tool
without any specialized utility since this tool is preinstalled in the flash memory in the
Express server as a standard.
As the setting menus set by SETUP are preset as optimal at the factory, you need not to use
SETUP in most cases, while you may use it in some cases as described below.
Important
1-44
The SETUP operation should be performed by the system administrator.
When you change the SETUP setting, you should save the changed setting
information.
For saving the information, please refer to "1.3.7.5.7.SR (Save system
CMOS/NvRAM)".
Do not set a password before installing OS (operating system).
The descriptions for some menus are not given below. Do not change the
default settings of those menus. If you change them, the device operation is
not assured and may cause a system failure.
The latest version of SETUP utility is preinstalled in the Express server. For
this reason, the setting screen may be different from the descriptions in this
manual. For the setting menus, please refer to the online help or call the
maintenance service provider.