USERS_GUIDE_1080XD_hw
1.4.1.1.2
SP console operations
After turning on the AC power breaker, boot the system on the SP console of the control PC.
This section describes the steps to boot the system. For details about the SP console, please
refer to 1.4.7 Service Processor (SP).
1.
<<< Connected Line.>>>
iSP Manager Login:
root
password:
GSP>
co
Please select console number:
S0
iSP0m> S
***** SP Command Mode
***** enter ESC to do the command input effectively *****
***** enter CTRL+B to quit
2.
***** returned from SP command mode *****
iSP MAIN MENU
0) OS(BIOS) serial console of partition#0 (POWER OFF
1) OS(BIOS) serial console of partition#1 (NOT CONFIGURED )
2) OS(BIOS) serial console of partition#2 (NOT CONFIGURED )
3) OS(BIOS) serial console of partition#3 (NOT CONFIGURED )
4) OS(BIOS) serial console of partition#4 (NOT CONFIGURED )
5) OS(BIOS) serial console of partition#5 (NOT CONFIGURED )
6) OS(BIOS) serial console of partition#6 (NOT CONFIGURED )
7) OS(BIOS) serial console of partition#7 (NOT CONFIGURED )
V) Virtual System Operator Panel
S) iSP commands
E) Exit
DISCONNECTALL) disconnect all console connections
iSP0m>
After opening the SP console, automatic log-in starts.
After entering CTRL+B, the iSP first menu appears.
*****
*****
)
1-11