NEC Express5800 1080Xd User Manual page 25

Hide thumbs Also See for Express5800 1080Xd:
Table of Contents

Advertisement

USERS_GUIDE_1080XD_hw
Possible Events (including input) and Action
Event
Incorrect account or password entered
Incorrect account or password entered
three times successively
Leaving the Login or the password
prompt for five minutes
Character(s) not listed in the menu is
entered
Showing a menu for five minutes
Disabled since the iSP master has
changed during displaying the menu
0 to 7 Selection
(enabled only with the master iSP)
S Selection
(enabled regardless of the master or the
backup)
V Selection
(enabled only with the master iSP)
E Selection
DISCONNECTALL Selection
Exceed the number of connections
available on the selected menu
Display "incorrect" and then, display the log in prompt again.
Cut off the connection.
Display "timeout" and then, cut off the connection.
Display the menu again.
Display "timeout" and then, cut off the connection.
The menu display and the prompt are not immediately viewed.
When a disabled menu is selected, it is skipped and another new menu
is displayed.
Shift to the OS (BIOS) serial console redirection.
Shift to the SP command console.
Shift to the virtual SOP.
Cut off the connection currently in operation.
Cut off all the connections except for the connection currently
established to iSP.
This is a special operation required for a situation where any following
operation becomes disabled when a cut-off connection remains for iSP
control because a fault event has occurred in a connection client
connected to iSP.
After the selection of this event, authentication is required using the
maintenance password.
Display "N connections to the selected mode are already established.
Try it later. " and then, display the first menu again.
Action
1-25

Advertisement

Table of Contents
loading

Table of Contents