NEC Express5800 1080Xd User Manual page 55

USERS_GUIDE_1080XD_hw
The following table include the functions of each menu.
Menu
System Serial Port
Serial port 1
PS/2 Mouse
Note: Serial Port
You may view two serial ports (COM1, COM2) from various applications including OS or
ESMPRO, but you can use only COM2 (System Serial Port) as the serial port. COM1
(Serial Port1) is an internal port which you cannot use.
Parameter
Disabled
2F8,IRQ3
FEB08000,IRQ3
[Auto]
Disabled
3F8,IRQ4
3E8,IRQ4
2E8,IRQ4
3F8,IRQ6
3E8,IRQ6
2E8,IRQ6
[Auto]
Disable
Enable
[Auto Detect]
Each serial port is displayed with the following names from the device manager on
OS.
Serial Port1: COM1
System Serial Port: COM2
Description
Specifies the "Disabled" status of the system serial port or
the interruption line of the I/O address.
Specifies the "Disabled" status of the serial port1 or the
interruption line of the I/O address.
Specifies the "Enable/Disable" of the PS/2 mouse.
[ ]: Factory Setting
1-55