NEC Express5800 1080Xd User Manual page 38

USERS_GUIDE_1080XD_hw
1.4.7.5.4 PC (Power Cycle)
Function:
Cut off the DC power of the system and restore the power to boot the system.
Cut off the power of the system regardless of the operation status of OS or BIOS and
without notifying anything to OS or BIOS.
(Screen Image)
iSPyz: ---> pc<ENTER>
CAUTION: System power will be turned off without any notice to the softwares
even if they are running.
Enter partition number (0-7/all/CR=exit) : all<ENTER>
Execute OK? (y/[n]) y<ENTER>
PC command was accepted. System power of all partitions will be turned off soon
and then will be turned on.
[iSPyz: INFO.ccc] partition 0 : power off sequence started.
[iSPyz: INFO.ccc] partition 1 : power off sequence started.
:
[iSPyz: INFO.ccc] partition 1 : power off sequence completed normally.
:
[iSPyz: INFO.ccc] partition 0 : power on sequence started.
[iSPyz: INFO.ccc] partition 1 : power on sequence started.
:
[iSPyz: INFO.ccc] partition 1 : power on sequence completed normally.
:
[iSPys: INFO.ccc] partition 1 : handed off the control to BIOS.
(Description)
Description
code
(a)
(b)
(c)
(d)
1-38
Enter the partition number.
If you select "all", all the configured partitions are set to be objects.
However, a partition, which has already been Power OFF, cannot be an object.
Display a confirmation message.
Enter "y" to continue the operation.
Display a DF command acceptance message.
Actual process operates in the background.
Display the operation status in the background.
Available against a partition in operation
(after automatic boot/UP command
executed)
Description
NML MNT
X X
Description
code
(a)
(b)
(c)
(d)