NEC Express5800 1080Xd User Manual page 91

USERS_GUIDE_1080XD_hw
1.8.1.4 Cleaning of DVD-ROM/CD-ROM
If dust sticks to the DVD-ROM/CD-ROM or stacks in the tray, you may not be able to read
data properly. Please clean the DVD-ROM/CD-ROM on a regular basis according to the
following steps.
(1) Confirm the Express server is turned on (the POWER lamp is on).
(2) Press the CD tray ejector button in front of the DVD-ROM/CD-ROM drive.
(3) Take out the DVD-ROM/CD-ROM carefully from the tray.
(4) Wipe off dust on the tray with a soft dry cloth.
(5) Insert the tray into the DVD-ROM/CD-ROM drive.
(6) Wipe the signal side of the CD-ROM with a soft dry cloth.
1.8.1.4.1 Handling instruction about DVD-ROM/CD-ROM
(1) Do not touch on the signal side (the side without printing).
(2) When you take out a DVD-ROM/CD-ROM from the storage case, please press on the
(3) Put the DVD-ROM/CD-ROM carefully on the tray with the printed side up.
(4) Do not put things on the DVD-ROM/CD-ROM or bend it.
(5) Do not attach a label and so forth on the DVD-ROM/CD-ROM.
(6) Do not scratch the DVD-ROM/CD-ROM or write down letters on it.
(7) Do not drop down the DVD-ROM/CD-ROM or damage it.
(8) If fingerprints or dust are left on the DVD-ROM/CD-ROM, please wipe them off with
(9) For cleaning the DVD-ROM/CD-ROM, please use a special type of cleaner designed
(10) Do not use or store the DVD-ROM/CD-ROM in a place with much dust or dirt.
(11) Do not leave the DVD-ROM/CD-ROM in a place with direct sunlight or close to a
(12) After using the DVD-ROM/CD-ROM, please keep it back in the storage case. Please
The tray is discharged from the DVD-ROM/CD-ROM drive.
center of the case while taking it out.
a soft dry cloth from the center towards the edge.
for DVD/CD. Do not use spray, cleaner, benzene or thinner which are designed for
record cleaning.
heater where it gets very hot.
store the CD-ROM provided with the device in a safe place. In case you should lose it,
please call NEC Fielding.
1-91