Table of Contents
Advertisement
User Setting Screen
• DPMS:
• BackLight:
• OSD Position:
• OSD User Time Out:
• Signal Judge:
• Chromaticity Diagram: This function is not available.
• Logo:
• Language:
• Reverse:
• DVI EQ:
When set at ON, the display power management function
puts the unit in the power-save mode if a selected input
has no signal and no key is operated for longer than 10
seconds. The backlight is automatically turned off.
Power OFF/ON: To be resumed by feeding a signal or
operating a key.
Used to change the backlight brightness of the LCD panel.
The adjustable range is from 0 to 255.
Used to select the on-screen display position. The numerical
settings allow the following display positions.
1: Upper right, 2: Top center, 3: Upper left, 4: Lower right,
5: Lower left
Used to set the time for the on-screen display to disappear.
The OSD disappears in any of the following time settings.
10s: 10 seconds, 30s: 30 seconds, 60s: 60 seconds, OFF: No
time setting
With this function, the OSD turns itself off if the OSD
setting key is not operated within a preset time.
It is possible to make setting for the detection of signal
disconnection.
OFF: Immediately after a no signal condition is detected,
the signal disconnection process is activated.
ON: When detections of signal disconnection occur
continually, the signal disconnection process is
activated.
It is possible to select the logo display when the power is
turned on:
OFF: No logo is displayed
ON: The Ikegami logo is displayed.
This switches the language between English and Chinese.
This is a function for inverting the screen display (Optional):
OFF: Normal display;
: Vertical flip display;
: Vertical and horizontal flip display;
COM: Externally controlled display
This cable compensation function helps suppress noises
when the DVI is connected using a long cable and suffers
from noises. The DVI EQ setting is to adjust the standard
input.
11
: Horizontal flip display;
5. Operation
Advertisement
Table of Contents
