Healthrider Crosstrainer R790 X Bike User Manual page 20

HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, the Left Side Shield (17) must be removed.
Remove the seven Screws (52) from the Right Side
Shield (18). Next, remove the Round Head Screw
(71) from the right side of the Side Shield Cover (19).
19
71
24
66
Using an adjustable wrench, turn the Left Pedal (24)
clockwise and remove it. Next, remove the two
Screws (66) from the Left Side Shield (17). Remove
the Round Head Screw (71) from the left side of the
Side Shield Cover (19) and lift it off. Gently remove
the Left Side Shield.
19
52
18
71
52
17
Next, locate the Reed Switch (43). Turn the Left
Crank Arm (42) until the Magnet (38) is aligned with
the Reed Switch. Loosen but do not remove the
Screw (66). Slide the Reed Switch slightly closer to or
away from the Magnet. Retighten the Screw. Turn the
Crank for a moment. Repeat until the console dis-
plays correct feedback. When the Reed Switch is cor-
rectly adjusted, reattach the Left Side Shield, the Side
Shield Cover, and the Left Pedal.
38
43
66
HOW TO MOVE THE EXERCISE CYCLE
To move the
exercise cycle,
first stand in
front of the exer-
cise cycle, hold
the handlebars,
and place one
foot on the front
stabiliser. Pull
the handlebars
until the exer-
cise cycle can
be moved on the front wheels. Carefully move the
exercise cycle to the desired location and then lower
it.
20
42
Place
your
foot
here
Wheel