Assembly - Healthrider C860e Elliptical User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included allen wrenches, assembly requires a phillips screwdriver , an
adjustable wrench , and a rubber mallet .
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been
pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
M8 Nylon M10 Nylon M10 Spacer
M10 Split M10 Bracket
Locknut (46)–4 Locknut (29)–4 (53)–2 Washer (70)–3 Washer (94)–2
M4 x 16mm M8 x 45mm Button M10 x 25mm
Plastic
Bolt (83)–4
Screw (66)–2 Patch Screw (52)–2
Washer (19)–4
M6 x 25mm
M6 x 20mm Pedal M8 x 19mm Shoulder M10 x 27mm
Screw (20)–4 Screw (63)–1 Screw (22)–2 Screw (71)–3
M10 Bolt Set (27)–2
M10 x 112mm Carriage Bolt (34)–4
5