Table of Contents
Advertisement
F - 160 CE Operation and Maintenance Manual
Figure 4.5.1 Disassembling of the crate
3
P l
a n
e 4
4
Removing the shrink wrap
a) Gently unwrap the shrink wrap from around the
laminator.
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
© GBC Films Group April 2000
1
P l
e 4
a n
P
l a
e 4
n
2
CAUTION
b) Move all packing materials to a safe distance.
Moving the laminator
5
a) Have the laminator rolled off the skid and
placed on the floor by licensed riggers. The ramps
included with the laminator can be secured utilizing
screws removed from the disassembled crate.
Figure 4.5.2 illustrates positioning of the ramps.
Do not attempt to use the ramps if they are
not secured to the pallet. Ensure the pallet is
on a flat even surface before attempting to
Figure 4.5.2 Positioning of the ramps
WARNING
roll the machine off.
Installation
Page 4 - 7
Advertisement
Table of Contents
