Getting Started; Baby Unit Power Supply; Parent Unit Battery Installation - Motorola MBP26 User Manual

2. Getting Started

2.1

Baby Unit Power Supply

1. Connect the small plug of the power adapter to the baby unit (camera)
and the other end to the electrical outlet.
NOTE
Only use the enclosed power adapter (6V DC / 500mA) with the slightly
larger DC plug.
2. Slide the ON/OFF switch to the ON position. The power LED will
light up in orange.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2

Parent Unit Battery Installation

The supplied rechargeable battery pack should be fitted so the parent
unit can be moved without losing the link with the camera. Charge the
battery in parent unit before first time use or when the parent unit
indicates the battery is low.
1. Insert the plug of the rechargeable battery pack into the small socket
inside the battery compartment as shown above and fit the battery
pack into the compartment.
8
Black
Red
Getting Started