4.5.4 Scan the cameras
1. Press the
2. Press the
and press the
for scan selection.
3. The screen will then display images from each registered
camera in a loop, changing about every 10 seconds.
Quick Method to View Cameras instead of using the menu.
If the parent unit is in scan mode and one of the registered cameras
is turned off or out of range, the scan will stop at the missing camera
(e.g. camera 3 ) and display the
Check the camera and correct the fault immediately if you are using
that camera to monitor your baby.
If you want to continue in camera scan mode without that camera,
delete the camera (see 4 4 . 5. 3 Delete a camera) and start the scan
Parent Unit Menu Options
button and the first menu option will appear.
DOWN button to select the VIEW CAMERA icon
button to confirm. Choose the
repeatedly to select
8 8 8 seconds.
Camera 1 - 4
icon while emitting a warning