Parent Unit Power Supply - Motorola MBP26 User Manual

Hide thumbs


Table of Contents
Place the battery cover over the compartment and gently tighten
the screw in a clockwise direction using a Small cross head or Flat
end screwdriver.

Parent Unit Power Supply

Installing the rechargeable battery pack and charging it fully before use is
recommended. This will allow the unit to operate on battery in the event
of a power
failure, or when moving to a different room.
1. Connect the small plug of the power adapter to the parent unit and
the other end to the electrical outlet. Only use the enclosed power
adapter (6V DC/
2. Press and hold the
turn ON the parent unit.
3. Once the baby and parent units are switched on, the display on the
parent unit will show the video captured by the baby unit.
Getting Started
Small cross head or
Flat end screw driver.
500mA) with the slightly smaller DC plug.
POWER ON/OFF button for 1 second to

Hide quick links:


Table of Contents

  Related Manuals for Motorola MBP26

This manual is also suitable for:


Table of Contents