Mac Filter List - ZyXEL Communications NWA Series User Manual

Table 47 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security
Mode: wpa3 (continued)
L ABEL
Radius Server Secret
Primary / Secondary
Accounting Server
Activate
Accounting Server
IP Address
Accounting Server
Port
Accounting Share
Secret
Accounting Interim
Update
Interim Update
Interval
General Server Settings
NAS IP Address
NAS Identifier
OK
Cancel
12.5 MAC Filte r L ist
This screen allows you to create and manage security configurations that can be used by your SSIDs. To
access this screen click
Note: You can have a maximum of 32 MAC filtering profiles on the Zyxel Device.
Fig ure 69
Configuration > Object > AP Profile > SSID > MAC Filter List
Chapter 12 AP Profile
DESC RIPT IO N
Enter the shared secret password of the RADIUS server to be used for authentication.
Select the check box to enable user accounting through an external authentication
server.
Enter the IP address of the external accounting server in dotted decimal notation.
Enter the port number of the external accounting server. The default port number is 1813.
You need not change this value unless your network administrator instructs you to do so
with additional information.
Enter a password (up to 128 alphanumeric characters) as the key to be shared between
the external accounting server and the Zyxel Device. The key must be the same on the
external accounting server and your Zyxel Device. The key is not sent over the network.
This field is available only when you enable user accounting through an external
authentication server.
Select this to have the Zyxel Device send subscriber status updates to the accounting
server at the interval you specify.
Specify the time interval for how often the Zyxel Device is to send a subscriber status
update to the accounting server.
If the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server)
IP address attribute, enter it here.
If the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server)
identifier attribute, enter it here. The NAS identifier is to identify the source of access
request. It could be the NAS's fully qualified domain name.
O K
Click to save your changes back to the Zyxel Device.
C a nc e l
Click to exit this screen without saving your changes.
C o nfig ura tio n > O b je c t > AP Pro file > SSID > MAC Filte r L ist
NWA/WAC/WAX Series User's Guide
121
.