Replacing Image Drum Unit - Oki OKIFAX 5400 User Manual

Hide thumbs Also See for OKIFAX 5400:
Table of Contents

Advertisement

CAUTION:
Please abide by the disposal laws of your country when disposing of replaced
toner cartridges.

Replacing image drum unit

If you have dirty print-outs then the image drum may have accumulated
toner on it. Press the Select Function key, then the 10/Message Print from
Memory One Touch key and then the YES key. Your fax machine prints a
cleaning page to clean the image drum. Repeat this procedure several
times and then check again if you still have dirty print-outs. If this
procedure does not solve the problem, your fax machine needs a new
image drum unit. Contact your supplier to order one.
If the faxes you receive are light or have vertical streaks in them and you
are not out of toner, or if your fax machine displays a CHANGE DRUM
message, your fax machine needs a new image drum unit. Contact your
supplier to order one.
The life of an image drum depends on a number of factors, including
temperature and humidity, the type of paper you use, and the number of
pages per job.
CAUTION:
Never expose the image drum unit to light for more than 5 minutes. Never
expose the image drum unit to direct sunlight. Always hold the image drum
unit by the ends. Never touch the surface of the green drum inside the image
drum unit.
1.
Lift the document table into an upright position.
2.
Push in the cover release buttons on the side of the copy stacker
until you hear a click. Lift the copy stacker.
Problem Solving
91

Advertisement

Table of Contents
loading

Table of Contents