Relay Initiating Station; Relay Key Station; Relay Broadcast Report; Initiating Relay Broadcasts - Oki OKIFAX 5400 User Manual

Relay initiating station

Your fax machine can act as the relay initiating station which starts the
relay broadcast by sending the original documents. Before programming
your fax machine to initiate a relay broadcast, you will need to obtain the
following information from the operator of the fax machine you intend to
use as a relay key station:
Relay Password: This is the 4-digit relay key word which is programmed
into the relay key station.
Relay Group Numbers: These 2-digit numbers are the code numbers of
locations or groups of locations programmed into the relay key station.

Relay key station

The relay key station is the fax machine which receives the original fax
message and then automatically relay broadcasts the message to other
remote fax machines. For this feature to be available, the fax machine
operating as a relay key station must be able to receive and relay broadcast
the message to other fax machines.

Relay broadcast report

After a relay broadcast is completed, it is possible for the relay key station
to send a message back to your fax machine confirming the success of the
relay broadcast. For this function to work, the telephone number of your
fax machine must be programmed into the Auto Dial list of your fax
machine with the Auto Dial code number 99.

Initiating relay broadcasts

1. Load your document.
2. Press the Select Function key.
3. Press the 4/Relay Initiate TX One Touch key. The display shows
RELAY PASSWORD.
4. If you are initiating a relay broadcast to another relay key station,
press the NO key. If this is the first time you are initiating a relay
broadcast, go to Step 5.
5. Using the numeric keypad, enter a 4-digit password which is the
same as the relay keyword programmed into the relay key station.
6. Press the YES key. The display shows REMOTE LIST NO.
7. Press the NO key.
Advanced Operations 65