Power Failures & Memory; Making Copies; Making Copies Using Manual Paper Feeder - Oki OKIFAX 5400 User Manual

Power failures & memory
If power is interrupted to your fax machine, the following problems will
occur:
• Any messages your fax machine has scanned into memory, but not
yet transmitted, are lost.
• Any messages your fax machine has received into memory, but not
yet printed, are lost.
• If you have loaded documents onto the document feeder of your fax
machine, any dialling or transmission settings are lost.
Your fax machine prints a power outage report to inform you of a power
failure. Use this report to determine which received messages you may
have lost and which transmissions you may have to resend. Refer to
Reports for more information.

Making copies

Your fax machine can also be used to make copies. You can make up to 99
copies at one time. Your fax machine automatically makes all copies in
FINE mode. EX.FINE and PHOTO mode can be selected manually by
pressing the YES key.
1. Load your documents.
2. Press the Copy key. The display shows PRG. NO. OF COPIES,
[1SETS]. If you want to make just one copy, you are finished. Your
fax machine waits a moment, then begins copying.
3. To make multiple copies, enter the number of copies you want to
make on the numeric keypad. Then press the Copy key again. Your
fax machine begins making the required number of copies.

Making copies using manual paper feeder

The manual paper feeder of your fax machine allows you to make copies
on a different type of paper than what is normally kept in the paper tray of
your fax machine. To make copies using the manual paper feeder, follow
the instructions below.
1. Load your documents.
2. Press in on the lower half of the front panel indents, just above the
paper cassette.
52 User's Guide