Familiarize Yourself With The Ap Hardware; Ethernet Lan Port; Figure 1. Netvanta 160/161 Ap And Plastic Mounting Bracket - ADTRAN 160 series Hardware Installation Manual

Physical Description

Familiarize Yourself with the AP Hardware

Figure 1 shows the NetVanta 160 Series and the plastic wall mounting bracket.
LEDs
Antenna Connectors
(NetVanta 161 only)

Figure 1. NetVanta 160/161 AP and Plastic Mounting Bracket

Ethernet LAN Port

The NetVanta 160/161 AP has one auto-sensing 10BASE-T/100BASE-TX/1000BaseT RJ-45 connector that
can be attached directly to 10BASE-T/100BASE-TX/1000BaseT switches to provide a full-duplex link. These
segments must conform to the IEEE 802.3 or 802.3u specifications. See
pinouts.
This connector uses an MDI (i.e., internal straight-through) pin configuration. You can use straight-through
twisted-pair cable to connect this port to most network interconnection devices such as a switch or router that
provide MDI-X ports. This connector will sense the correct wiring polarity, so no crossover cable is required.
The AP appears as an Ethernet node and performs a bridging function by moving packets from the wired LAN
to remote workstations on the wireless infrastructure.
18
Reset Switch
Plastic Mounting Bracket/
Copyright © 2013 ADTRAN, Inc.
NetVanta 160 Series
Vertical Stand
Slots
Vertical Stand
Ethernet
LAN Port
Table A-1 on page 27 for Ethernet port
61700416F1-34A