ADTRAN 160 series Hardware Installation Manual

Netvanta 160 series

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

1700416F1

1700417F1

1700922F1

1700939F1

61700416F1-34A

February 2013

NetVanta 160 Series

Wireless Access Point

Hardware Installation Guide

NetVanta 160

NetVanta 161

Optional External DC Power Adapter

Optional Set of Six Antennas

(three 2.4 GHz, three 5 GHz)

Table of Contents

Need help?

Do you have a question about the 160 series and is the answer not in the manual?

Questions and answers

Summary of Contents for ADTRAN 160 series

Page 1 NetVanta 160 Series Wireless Access Point Hardware Installation Guide 1700416F1 NetVanta 160 1700417F1 NetVanta 161 1700922F1 Optional External DC Power Adapter 1700939F1 Optional Set of Six Antennas (three 2.4 GHz, three 5 GHz) 61700416F1-34A February 2013...
Page 2 To the Holder of the Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication.
Page 3 NetVanta 160 Series Conventions Conventions Notes provide additional useful information. Cautions signify information that could prevent service interruption or damage to equipment. Warnings provide information that could prevent injury or endangerment to human life. 61700416F1-34A Copyright © 2013 ADTRAN, Inc.
Page 4 These units contain no user-serviceable parts. They should only be serviced by qualified service personnel. Additional safety guidelines, such as Waste Electrical and Electronic Equipment (WEEE), are given in the document NetVanta Safety and Regulatory Information available online at http://supportforums.adtran.com. Save These Important Safety Instructions Copyright © 2013 ADTRAN, Inc. 61700416F1-34A...
Page 5 Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. 61700416F1-34A Copyright © 2013 ADTRAN, Inc.
Page 6: Table 1. Netvanta 160/161 Antenna Specifications
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The Country Code Selection feature is disabled for products marketed in the U.S.A. and Canada. Copyright © 2013 ADTRAN, Inc. 61700416F1-34A...
Page 7 Denial of Service (DoS) attacks, loss or theft of data, and the unauthorized or illegal use of said equipment. ADTRAN OFFERS NO WARRANTIES, EITHER EXPRESSED OR IMPLIED, REGARDING THE PREVENTION, DETECTION, OR DETERRENCE OF TOLL FRAUD, NETWORKING ATTACKS, OR UNAUTHORIZED, ILLEGAL, OR IMPROPER USE OF ADTRAN EQUIPMENT OR SOFTWARE.
Page 9: Table Of Contents
NetVanta 160 Series Shipping Contents........
Page 15: Introduction
The NetVanta 160 Series consists of the NetVanta 160 and NetVanta 161. In this document, the term NetVanta 160 Series means all of the units collectively. If a statement only applies to one particular router, the text refers to the router individually.
Page 16: Physical Description
2.4G 1 through 3 or 5G 1 through 3 on the chassis. The antennas can be ordered from ADTRAN in a set of six (three 2.4 GHz and three 5 GHz, P/N 1700939F1).
Page 17: Power
Humidity: Up to 90 percent, noncondensing NetVanta 160 Series Shipping Contents Each NetVanta 160 Series unit is shipped in its own cardboard shipping carton. Open each carton carefully, and avoid deep penetration into the carton with sharp objects. After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the Support page on the ADTRAN website at http://www.adtran.com/support).
Page 18: Familiarize Yourself With The Ap Hardware
Physical Description NetVanta 160 Series Familiarize Yourself with the AP Hardware Figure 1 shows the NetVanta 160 Series and the plastic wall mounting bracket. Reset Switch LEDs Vertical Stand Slots Plastic Mounting Bracket/ Vertical Stand Ethernet LAN Port Antenna Connectors (NetVanta 161 only) Figure 1.
Page 19: Power Over Ethernet
100 Mbps maximum throughput. To realize the full benefit of 802.11n, the NetVanta 160/161 AP should be should be connected to a Gigabit Ethernet PoE switch, such as the NetVanta 1534P (P/N 1702591G1), or a PoE injector, such as the ADTRAN Single Port PoE Injector (P/N 1700920F1). Reset Switch Your NetVanta 160/161 AP can be reset by inserting a small pointed object into the hole in the side of the unit labeled RESET.
Page 20: Unit Installation
If the AP is used in a medical environment, it must use an IEC/EN 60601-1 compliant power adapter. Mounting Options The NetVanta 160 Series AP can be installed in a tabletop, wall mounted, or ceiling mounted configuration. If the AP is used in a tabletop configuration, proceed to Supplying Power to the AP on page...
Page 21: Mounting The Ap On A Desktop
You will hear a click. The unit can now be set on a table or shelf. Vertical Stand LEDs Slots Plastic Mounting Bracket/ Vertical Stand Figure 2. Attaching the Vertical Stand 61700416F1-34A Copyright © 2013 ADTRAN, Inc.
Page 22: Mounting The Ap To Drywall Or Electrical Box
(in the B positions) into the electrical box and tighten. Engaging the slots on the back of the AP with the hooks, slide the AP onto the plastic mounting bracket until it clicks. Hook Hook Figure 3. Plastic Mounting Bracket Copyright © 2013 ADTRAN, Inc. 61700416F1-34A...
Page 23: Mounting The Ap To A Dropped Ceiling
AP across until it snaps, locking the AP to the bracket (B) as shown in Figure 6 on page Slots Metal Slider Metal Slider Figure 4. Attaching the Metal Slider to the AP 61700416F1-34A Copyright © 2013 ADTRAN, Inc.
Page 24: Figure 5. Securing The Metal Ceiling Bracket To The Ceiling Tile Separator
Ceiling Tile Separator Metal Ceiling Bracket Moveable Section Tabs Screw (Shown from Above) Figure 5. Securing the Metal Ceiling Bracket to the Ceiling Tile Separator Figure 6. Attaching the AP to the Ceiling Bracket Copyright © 2013 ADTRAN, Inc. 61700416F1-34A...
Page 25: Supplying Power To The Ap
Supplying Power to the AP The NetVanta 160/161 AP does not have a power switch. It is powered when connected to ADTRAN’s Single Port Power over Ethernet (PoE) Injector (P/N 1700920F1) or an access controller (AC) that supplies PoE based on the IEEE 802.3af standard.
Page 27: Appendix A. Connector Pin Definitions
APPENDIX A. CONNECTOR PIN DEFINITIONS The following table provides the pin assignments for the NetVanta 160 Series. Table A-1. 1000Base-T Gigabit Ethernet Port Pinouts Name Description TRD0+ Transmit/Receive Positive TRD0- Transmit/Receive Negative TRD1+ Transmit/Receive Positive TRD2+ Transmit/Receive Positive TRD2- Transmit/Receive Negative...

This manual is also suitable for:

Netvanta 160 Netvanta 161

ADTRAN 160 series Hardware Installation Manual

Introduction

Physical Description

Unit Installation

Appendix A. Connector Pin Definitions

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ADTRAN 160 series

Summary of Contents for ADTRAN 160 series

This manual is also suitable for:

Table of Contents