Summary of Contents for ADTRAN NetVanta 100 Series
Page 1
NetVanta 100 Series Hardware Installation Guide 1700412E1 NetVanta 150 4700412E1 NetVanta 150 with Power Supply 4700412E1#IN NetVanta 150 with International Power Supply NetVanta 150 Ceiling 1700405G1 Mounting Bracket 61700412E1-34C March 2010...
Page 2
To the Holder of the Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication.
Page 4
Safety Instructions NetVanta 100 Series Hardware Installation Guide Safety Instructions When using your equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
Page 5
NetVanta 100 Series Hardware Installation Guide FCC Radio Frequency Interference Statement FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 6
FCC Compliance Notice: Radio Frequency Notice NetVanta 100 Series Hardware Installation Guide FCC Compliance Notice: Radio Frequency Notice NetVanta 150 Wireless Access Point ABG Tested to Comply with FCC Standards For Home or Office Use This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1.
Page 7
NetVanta 100 Series Hardware Installation Guide Notification for Devices with Detachable Antennas Notification for Devices with Detachable Antennas The NetVanta 150 has been designed to operate with the antennas listed below, and to have a maximum gain of 2 dB (for the 802.11bg radio) and 3 dB (for the 802.11a radio). Antennas not included in this list or having a gain greater than 2 dB (for the 802.11bg radio) and 3 dB (for the 802.11a radio) are strictly...
Page 8
Wireless Radio Channel Ranges NetVanta 100 Series Hardware Installation Guide Wireless Radio Channel Ranges The following table lists by country the channels support by the ADTRAN WAPs. 802.11a (5 GHz) 802.11bg (2.4 GHz) Country Wireless Radios Channels Wireless Radios Channels...
NetVanta switch and router products. This unit offers the following features: • Power from a Power over Ethernet (PoE) enabled RJ-45 Ethernet connection or from an ADTRAN external 12 VDC converter supply.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the Support page on the ADTRAN website at http://www.adtran.com/support).
NetVanta 100 Series Hardware Installation Guide Physical Description PHYSICAL DESCRIPTION Reviewing the Front Panel Design Figure 1 shows the NetVanta 150 front panel. Figure 1. NetVanta 150 Front Panel Layout Front Panel LEDs The NetVanta 150 WAP has four LED indicators on the front panel: a single bi-color LED for the...
Physical Description NetVanta 100 Series Hardware Installation Guide Reviewing the Rear Panel Design Figure 2 shows the NetVanta 150 WAP rear panel. The unit accommodates a 12 VDC power supply. 10/100Base-T Ethernet Optional 12 V PoE Port Power Source Factory Default Switch...
NetVanta 100 Series Hardware Installation Guide Unit Installation UNIT INSTALLATION The instructions and guidelines provided in this section cover hardware installation topics, such as wall mounting and supplying power to the unit. To prevent electrical shock, do not install equipment in a wet location or during a lightning storm.
Unit Installation NetVanta 100 Series Hardware Installation Guide Wall Mounting The NetVanta 150 can be safely mounted on the wall by following these steps: Instructions for Wall Mounting Step Action Install the antennas on the WAP. Refer to Installing the Antennas on page Decide on a location for the unit.
NetVanta 100 Series Hardware Installation Guide Unit Installation Ceiling Mounting The NetVanta 150 can be safely mounted on the ceiling by following these steps: Instructions for Ceiling Mounting Step Action Install the antennas on the WAP. Refer to Installing the Antennas on page Using the mounting bracket (P/N 1700405G1) as a template, drill three holes in the ceiling tile large enough for the #8-32 bolts.
The external power supply is not automatically shipped with the NetVanta 150 WAP but a domestic (P/N 4700412E1) or international (P/N 4700412E1#IN) bundle containing the appropriate external power supply can be requested from ADTRAN or your reseller. Connecting to the WAP...
NetVanta 100 Series Hardware Installation Guide Unit Installation Factory Default Switch • Press the factory default switch once to reboot the unit. • Press and hold the reset factory default switch for 30 seconds to overwrite the existing configuration with the default configuration and reboot the unit.