Table of Contents
Advertisement
Magnum 3000 Stackable Hubs
1.1
Specifications - Repeater Port Modules (RPMs); Bonus Ports
RPM Type :
Front Access
Connector Type
Partition (PART)LED
Receive (RX) LED
LINK LED
Switch on Face Plate
"Fiber-mm" is multi-mode cable, normally used for 10BASE-FL installations, up to
2.0Km.
"Fiber-sgl.m" is single-mode cable, used for distant installations, up to 10.0Km.
*
The RJ-45 connector is shielded; it accepts RJ-45 eight-pin plugs for unshielded
and shielded twisted pair wiring.
** Internal termination switch for BNC, no "T" connector is required.
*** MDI-X (Media Dependent Interface - Crossover) switch for RJ-45 uplink,
no crossover cable is required.
1.2
Specifications - Bridge Port Modules (BPMs); Bonus Ports
BPM Type :
Connector Type
Switch on FP
FWD-I LED
FWD-X LED
LINK LED
*
The RJ-45 connector is shielded; it accepts RJ-45 eight-pin plugs for unshielded
and shielded twisted pair wiring.
** Internal termination switch for BNC, no "T" connector is required.
*** MDI-X (Media Dependent Interface - Crossover) switch for RJ-45 uplink,
no crossover cable is required.
www GarrettCom com
.
.
BNC
AUI
DTE
yes
yes
yes
BNC-f DB-15 f DB-15 m
yes
yes
yes
yes
yes
yes
n.a.
n.a.
n.a.
yes**
n.a.
n.a.
BNC
AUI
Fiber
BNC(f) DB-15(f)
ST
yes**
n.a.
n.a.
yes
yes
yes
yes
yes
yes
n.a.
n.a.
yes
3
Installation and User Guide (07/06)
Fiber-mm Fiber-sgl.m
yes
yes
Fiber-ST Fiber-ST
yes
yes
yes
yes
yes
yes
n.a.
n.a.
TP*
RJ-45
yes***
yes
yes
yes
TP*
yes
RJ-45
yes
yes
yes
yes***
Advertisement
Table of Contents
