Table of Contents
Advertisement
</Advanced>
<IPMaps>
<!-- The DynamicRange is the only IP Map supported. You may have 0 or more.
</IPMaps>
</Profile>
</DHCPServer>
<!-- ______________________________________________________________________________________
<!-- MAC security
<MACSecurity>
<Mode>learning OR
<!-- Authorized entries
<Authorized
<ValidatePorts>yes OR
<Entry>
</Entry>
<Entry>
</Entry>
</Authorized>
</MACSecurity>
</SystemConfiguration>
(Revised 2012-05-01)
<DNSServer2>192.168.2.11</DNSServer2>
<Gateway1>192.168.2.1</Gateway1>
<Gateway2>192.168.2.2</Gateway2>
<DynamicRange>
<!-- low and high within range of profile
<LowIP>192.168.2.1</LowIP>
<HighIP>192.168.2.4</HighIP>
</DynamicRange>
-->
locked</Mode>
-->
mode="keep or delete">
<!-- mode=delete - delete existing authorized MACs before adding
authorized MACs (default)
<!-- mode=keep - do not delete existing authorized MACs before
adding authorized MACs
no</ValidatePorts>
<MACAddress>00:07:af:ff:5b:c0</MACAddress>
<!-- MAC is valid on all ports listed in the ports list.
If the ports list is missing, then the MAC is valid on all ports.
<Ports>
<Port>
<!-- Use PortNumber or PortName
<PortNumber>4</PortNumber>
</Port>
<Port>
<PortName>TX5</PortName>
</Port>
</Ports>
<MACAddress>0007af1d6460</MACAddress>
-->
<!-- required
<!-- required
<!-- Mode must be learning or locked
<!-- mode must be "keep" or "delete"
-->
-->
<!-- optional
<!-- Must be yes(default) or no.
If no, invalid ports are ignored.
<!-- 17 character limit
-->
<!-- 1 to maximum port for switch
<!-- Name of port on switch
<!-- Example of a MAC with no
delimiters, valid on all ports.
-->
-->
-->
-->
-->
-->
-->
Page 169 of 170
-->
-->
-->
-->
-->
-->
Advertisement
Table of Contents
