Table of Contents
Advertisement
CLI Commands, Continued...
Show or Set Port Configuration
Command
Port
Name
Description
Show or set Port configuration.
Syntax
port [-show] [-admin state] [-sd auto | 10h | 10f | 100h | 100f | 1000h | 1000f]
[-flow state] [-fhp state] [-dp prio] [-dscp state] [-8021p state] [-pvid vid]
[-ual percent] [-uah percent] [-security state] portno
Parameters
Portno
Port number to configure or show. Specify "all" to show all ports.
-show
Show configuration.
-admin state
Set the admin status for the port to e(nabled) or d(isabled).
-sd
Set the speed and duplex mode for the port.
auto = enable auto-negotiation
-flow state
Set the flow control for the port to e(nabled) or d(isabled).
-fhp state
Set force high priority for the port to e(nabled) or d(isabled).
-dp
Set the default QOS priority for the port. The range is 0-7.
-dscp state
Set the DSCP Priority for the port to e(nabled) or d(isabled).
-8021p state
Set the 802.1p Priority for the port to e(nabled) or d(isabled).
-pvid
Set the VLAN ID for the port. The range is 1-4094.
-ual percent
Set the usage alarm low percentage. The range is 0-100.
-uah percent
Set the usage alarm high percentage. The range is 0-100.
-security state
Set the security status for all supported ports to e(nabled) or d(isabled).
N-TRON/Admin> port –sd 100f –flow enabled –dp 7 –pvid 2 5
Examples
Port Port
No
Name
---- ---- -------- ---- -------- ---- ---- -------- -------- --- ---------- ----
5 TX5
Changes have been made that have not been saved.
N-TRON/Admin> port -sd 100f -flow enabled -dp 7 -pvid 2 5
Port Port
No
Name
---- ---- -------- ---- -------- ---- ---- -------- -------- -------- -------- --- ---------- ---- ----- ------ --------
5 TX5
Changes have been made that have not been saved.
N-TRON/Admin>...
NOTES
(Revised 2012-05-01)
Admin
Link
Auto
Status
Stat
Nego
Enabled
Down Disabled
Admin
Link
Auto
Port Dupl
Status
Stat
Nego
Spd
Mode Control
Enabled
Down Disabled
100 Full Enabled
Port Dupl
Flow
Force
Spd
Mode Control
High Pri Pri
100 Full Enabled
Disabled
Flow
Force
Include
Include
High Pri
DSCP
802.1p
Disabled Enabled
Enabled
Def
Port
State
PVID
7 Disabled
2
Usage Usage
Def
Port
Alarm Alarm
Pri
State
PVID Low % High % Learning
7 Disabled
2
0
Page 148 of 170
Security
Status=
100 Disabled
Advertisement
Table of Contents
