Table of Contents
Advertisement
CLI Commands, Continued...
Show or Set Port Configuration
Command Name
Port
Description
Show or set Port configuration.
Syntax
port [-show] [-admin state] [-sd auto | 10h | 10f | 100h | 100f | 1000h | 1000f]
Parameters
Portno
-show
-admin state
-sd
-flow state
-fhp state
-dp
-dscp state
-8021p state
-pvid
-ual percent
-uah percent
-security state
N-TRON/Admin> port –sd 100f –flow enabled –dp 7 –pvid 2 5
Examples
Port Port
No
---- ---- -------- ---- -------- ---- ---- -------- -------- --- ---------- ----
5 TX2
Changes have been made that have not been saved.
N-TRON/Admin> port -dscp e 1
Port Port
No
---- ---- -------- ---- -------- ---- ---- -------- -------- -------- -------- --- ---------- ----
1 TX1
Changes have been made that have not been saved.
N-TRON/Admin>
NOTES
(Revised 2012-05-01)
[-flow state] [-fhp state] [-dp prio] [-dscp state] [-8021p state] [-pvid vid]
[-ual percent] [-uah percent] [-security state] portno
Port number to configure or show. Specify "all" to show all ports.
Show configuration.
Set the admin status for the port to e(nabled) or d(isabled).
Set the speed and duplex mode for the port.
auto = enable auto-negotiation
Set the flow control for the port to e(nabled) or d(isabled).
Set force high priority for the port to e(nabled) or d(isabled).
Set the default QOS priority for the port. The range is 0-7.
Set the DSCP Priority for the port to e(nabled) or d(isabled).
Set the 802.1p Priority for the port to e(nabled) or d(isabled).
Set the VLAN ID for the port. The range is 1-4094.
Set the usage alarm low percentage. The range is 0-100.
Set the usage alarm high percentage. The range is 0-100.
Set the security status for all supported ports to e(nabled) or d(isabled).
Admin
Link
Auto
Name
Status
Stat
Nego
Enabled
Down Disabled
Admin
Link
Auto
Name
Status
Stat
Nego
Enabled
Down Enabled
Port Dupl
Flow
Spd
Mode Control
100 Full Enabled
Port Dupl
Flow
Force
Spd
Mode Control
High Pri
Auto Auto Disabled Disabled Enabled
Force
Def
Port
High Pri Pri
State
Disabled
7 Disabled
Include
Include
Def
Port
DSCP
802.1p
Pri
State
Enabled
1 Disabled
PVID
2
Usage Usage
Alarm Alarm
PVID
Low % High %
----- ------
1
0
100
Page 146 of 169
Advertisement
Table of Contents
