2.
Installation
2.1 Hard Disk Installation
1. Make sure the DVR is power-off.
2. Unscrew the three housing screws on the back panel of the DVR.
3. Unscrew the two housing screws on the both side of the DVR. Push the housing to the back
and open it.
4. Screw two HDD brackets on both sides of the HDDs using the Sliver Screws.
Figure 2-1
Figure 2-2
Sliver Screw
HDD Bracket
Figure 2-3
8
ECOR960 X1
Chapter
2