EverFocus ECOR960 X1 User Manual page 14

No. Name
11 Status LED
12 USB2.0 Port
13 Channel 1~16
14 View
15 SEQ (Sequence)
16 Display
17 Monitor
18 Zoom
19 Search
20 Copy
Description
Power LED: Indicates the power is on.
HDD LED: Indicates the internal Hard Disk is activating.
Alarm LED: Indicates the alarm input is triggered.
Network LED: Indicates the DVR is connected to the network.
Record LED: Indicates the DVR is recording.
The USB2.0 ports for connecting to a mouse or external storage
device.
Press to display the channel in full screen. The LED indicates the
channel is displayed in full screen.
Press the type of layout you want for displaying your channel feeds.
Press to enter the automatic sequence mode. This will show each
channel feed in sequence.
Press to cycle between the info display types (channel and status bar
info).
Press to switch between the Main and Call monitors. Just remember
to exit out of the setup menus before doing so.
Press repeatedly to toggle between 2x and 4x zoom. Press the
Menu/Esc button to switch zoom off.
Press to enter the Search Setup menu.
Press to enter the Copy Menu.
6
ECOR960 X1