Monitor Connection - EverFocus ECOR960 X1 User Manual

2.3.1

Monitor Connection

Connect the monitor to the HDMI, VGA or BNC port on the rear panel of the DVR. The ECOR960
X1 DVR provides 2 main monitor outputs with identical functionality - VGA and HDMI.
Both outputs can be used simultaneously and deliver full HD output resolution (1920x1080,
progressive, 60 Hz. vert., 68 KHz hor.).
Make sure that the connected monitor's specifications comply with these resolution
requirements.
Note:
1. The connected monitors' specifications must comply with the resolution requirements.
2. Do not exceed the max. HDMI cable length of 15 meters.
3. The standard HDMI cables can support cable length up to 3 meters. For longer
distances, such as 15 meters, it is highly recommended to use high quality HDMI cables.
Rear View
HDMI Cable / VGA Cable
Main Monitor
Figure 2-11
13
BNC Cable
Call Monitor
ECOR960 X1