Remote Live View - EverFocus ECOR960 X1 User Manual

7.3 Remote Live View

1
2
3
4
5
6
7
8
No. Name
1 Menu Bar
Live View
2
Window
3 4 / 9 / 16 UP
Microphone /
4
Speaker
5 Sub / Main
6 Snapshot
7 Channel Buttons
8 Status Highlight
Figure 7-15
Description
For configuring the DVR. Please refer to 4. OSD Root Menu.
Double-click on a camera image to enlarge the current display to full
screen; double-click again or press the Esc key to return to the
normal view.
Indicates the Live View screen is in 4-division.
Click the Microphone button to transfer audio to DVR from client
side if there is a microphone attached to the PC and an amplifier and
speaker attached to the DVR.
Click the Speaker button to transfer audio to the client side from DVR
if there is a speaker on the PC and a microphone and preamp
attached to the DVR, and audio recording is enabled on the DVR.
Click to switch between the Main stream and Sub stream.
Click the Snapshot button to save a snapshot of the video image
currently being displayed.
Click to display the channel in full screen.
Green: Indicates the live view is in a normal status.
Orange: indicates a motion is being detected.
Blue: Indicates video loss.
Red: Indicates an alarm / event is triggered.
Grey: Indicates the live view is disabled.
121
ECOR960 X1