Basic Connection - EverFocus ECOR960 X1 User Manual

2.3 Basic Connection

The instructions below describe the basic connection for the ECOR960 X1. For details on cable
connections, please refer to the following sections.
1
Mouse
5
Main Monitor
1. Optionally connect a mouse to the DVR to control the system. You can also control the
system using the supplied IR Remote Control or the control keys on the front panel.
2. Connect the cameras to the DVR using the coaxial cables. 700TVL cameras are recommended.
3. Connect the audio input devices to the DVR.
4. To listen to audio of video source, connect speakers to the Audio Out port. Note that
speakers with amplifier are required.
5. To view videos, connect a monitor to the HDMI, VGA or BNC port using the HDMI, VGA or
BNC cable supplied by the monitor manufacturer.
6. To manage the DVR over network, use a standard RJ-45 cable to connect the DVR to the
network.
7. Using the supplied Power Cord, connect one end to the 12 VDC port on the DVR and the
other end to the 12 VDC power outlet.
Note: Please ensure to connect the internal power cables to the internal HDDs before
powering on the DVR.
2
Analog Camera 1~16
Main Monitor Call Monitor
(HDMI)*
(VGA)* (BNC)
Figure 2-10
3
Line Level Audio In 1~4
6
Network
Web Remote PowerVideo Plus
Client (CMS)
12
ECOR960 X1
4
Line Level
Audio Out
7
Power Supply