Monitor Connection - EverFocus PARAGON FHD 16x4 User Manual

2.3.1

Monitor Connection

Connect the monitor to the CVBS, HDMI or VGA port on the rear panel of the DVR. The PARAGON
FHD 16x4 DVR provides 1 main monitor output (HDMI); and 2 call monitor outputs (VGA and BNC)
with identical functionality.
The main monitor output can deliver full HD output resolution (1920x1080, progressive, 60 Hz.
vert., 68 KHz hor.). The 2 call monitors can display camera streams or perform sequence display
mode. Both of the 2 call monitor outputs provide the identical functionality and can be operated
simultaneously. Make sure that the connected monitor's specifications comply with the resolution
requirements. To configure the monitor setting, please refer to 6.6 Display Setting.
You can also optionally connect the monitors to each Loop Video Output to display the video of
the corresponding channel.
Note:
1. The connected monitors' specifications must comply with the resolution requirements.
2. Do not exceed the max. HDMI cable length of 15 meters. The standard HDMI cables can
support cable length up to 3 meters. For longer distances, such as 15 meters, it is highly
recommended to use high quality HDMI cables.
Rear View
HDMI
CVBS
Cable
Cable
Call Monitor Main Monitor
(CVBS) (HDMI)
17
PARAGON FHD 16x4
VGA BNC
Cable Cable
Loop Video Output
Call Monitor
(VGA) 1~16 (BNC)