10
Triggers
3 Press the Source softkey, and turn the Entry knob to select the input
4 Press the Rising Edge or Falling Edge softkey to toggle between edge types.
5 Press the Level Select softkey to select High; then, turn the Trigger Level
6 Press the Level Select softkey to select Low; then, turn the Trigger Level
7 Press the Qualifier softkey to toggle between "greater than" or "less than".
8 Press the Time softkey, and turn the Entry knob to select the time.
Nth Edge Burst Trigger
The Nth Edge Burst trigger lets you trigger on the Nth edge of a burst that
occurs after an idle time.
156
channel source.
knob to adjust the high level.
knob to adjust the low level.
You can also push the Trigger Level knob to toggle between High and
Low selection.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide