Defining the extended label print
This option allows to additionally print the information listed below on
the endlabel.
The desired information is positioned on the endlabel by means of a
defined program line.
When the extended label print is activated, the information will always
be printed at the predefined position, regardless of the barcode
set-up file that has been loaded.
******************************************************************************
*
* 550-867 D5
* 04. Nov. 2010
* This is the extended label printing setup file
* for customer specific label printing
*
* Format of the control lines:
* ———————————————————-
* POSX , POSY , FONT , DESCRIBING TEXT , INFO-CODE
*
* Each line, which has a " * " as first character is
* ignored.
*
* Avaible Info-Codes:
* ———————————————
* MB1 - MB9 : scanned mutli barcodes 1-9
* ONM : operator name
* OPN : operator personel number
* FAB : manufacturer code
* MAC : machine number
* TRN : needle thread barcode
* TRB : bobbin thread barcode
* DPC : daily piece number
* DNF : daily piece number formatted to 4 digits
* DNT : daily piece number formatted to 3 digits
* ERC : actual error code
* SNM : seam record name
* SRN : seam record number 00-99
* DAT : date
* TIM : time
* JDY : Julean Day
* YR2, YR4 : Year with 2 or 4 digits
* DAY : Tag
* MON : Month
* BON : bobbin number
* PB1,PB2,PB3 : parts barcode 1,2,3
* SRT : text from the seam record
* CYN : cycle number
* DT2 : Date : Day, Month, Year but each with 2 digits
* RC2,RC3,RC4,RC5,RC6,RC7,RC8 : resident part counter with 2..8 digits
* GRP : Graphics, Print BMP-file, Filename without ".bmp" instead DESCR.TEXT
*
*****************************************************************************
*5,11,3,,SNM
*85,33,6,,DT2
*85,15,6,,DT2
*65,15,3,DA,GRP*
**************************************************************************
54,14,2, ,DNF
61,14,2, , MAC
65,14,2, , YR2
69,14,2, , JDY
94