Setting A New Operator - Duerkopp Adler 550-867 Service Instructions Manual

4.3

Setting a new operator

54
Before the engineered sewing station can be used the operator has to
be logged in. The person logging in the new operator has to be
authorized to access at least security level 2.
Note!
The length of the card barcode has to be predefined in the setup.
–
Log in to the system
–
Press the "Access" button
–
Press the button "New".
The following screen will appear:
–
Enter the name of the new operator and determine his security
level.
–
Enter the personnel id number.
–
Enter the password.
–
Repeat the password entry.
–
Press the "Print BC" button.
A barcode for the log-in via scanner will be printed for the new
operator.
–
Press the Log-in key.
–
Enter the Barcode via hand scanner.
The number will be displayed in the field "Id number".
–
Press the Button "OK".
The entry will be adopted.
–
Memorize.
Note:
The log-in system only functions with the barcode type 128.
Any other barcode types are not accepted by the system.
The contents of the access barcode can be checked lateron via hand
scanner.