4.11 Determining the endlabel layout
In order to carry out changes in the barcode labelling system the
operator must be authorized to security level 2.
–
Log in to the system.
–
Call up "Check".
–
Call up "Setup".
–
Call up "Label".
2
3
4
–
Enter the measured height of the label in the field "Label length".
for example: 25 mm
–
Enter the space between the labels in the field "Gap".
for example: 3 mm
–
Enter the desired label text into the fields 1.
for example:
Endlabel text 1 = Manufacturer
Endlabel text 2 = Model
Endlabel text left = Left-hand seat
Endlabel text right = Right-hand seat
–
Set the origin for the text coordinates in the fields 2.
–
Set the position of the endlabel text 1 in the fields "Pos. text 1 X"
and "Pos. text 1 Y".
–
Set the position of the endlabel text 2 in the fields "Pos. text 2 X"
and "Pos. text 2 Y".
–
Set the position of the barcode in the fields "Pos. BC X" and Pos.
BC Y" .
–
In the field 3 the desired font is set.
–
With button 4 the set label is printed out.
1
1
95