Setting The Working Height - DURKOPP ADLER 281 Operating Manual

56

7.6 Setting the working height

The working height is continuously adjustable between 750 and
900 mm (clearance between the floor and upper edge of the table
plate).
Figure 33: Setting the working height
①
(1) - Screws
1. Loosen all four screws (1) on the head sections.
2. Set the table plate to the desired height.
Important: Pull out or push in the table plate evenly at both
sides to prevent it from jamming.
3. Tighten the screws (1) on the head sections.
①
Operating manual 281 Version 06.0 - 05/2013
Set-up