Sewing - DURKOPP ADLER 281 Operating Manual

42

5.15 Sewing

WARNING
Risk of injury from the needle tip when sewing
is started unintentionally.
Take care not to accidentally press the foot pedal
when your fingers are in the needle tip area.
The foot pedal starts and controls the sewing process.
Figure 25: Sewing with the foot pedal
(1) - Pedal position +1:
sewing active
(2) - Pedal position 0:
rest position
Initial position:
To position the material to be sewn:
1. Switch on the sewing machine.
2. Pedal position 0:
Machine stationary, needles up, sewing foot down.
To position the material to be sewn:
1. Press the foot pedal halfway back in pedal position -1:
The sewing foot is raised.
2. Push the material to be sewn into the initial position.
Sewing:
1. Press the foot pedal forwards in pedal position +1:
The machine sews. The sewing speed increases the
further forward the pedal is pressed.
(3) - Pedal position -1:
moves the sewing foot up
(4) - Pedal position -2:
sewing the final bartack and
cutting off the thread
Operating manual 281 Version 06.0 - 05/2013
Operation
①
②
③
④