Setting The Bobbin Filling Quantity - DURKOPP ADLER 281 Operating Manual

Operation
Operating manual 281 Version 06.0 - 05/2013

5.5 Setting the bobbin filling quantity

WARNING
Risk of injury from moving parts.
Switch off the sewing machine before setting the
bobbin filling quantity.
Figure 9: Setting the bobbin filling quantity
(1) - Screw
1. Loosen the screw (1).
2. Set the metallic bobbin winder piece (2):
• Lower filling quantity:
Pivot the metallic bobbin winder piece (2) towards the
bobbin.
• Larger filling quantity:
Pivot the metallic bobbin winder piece (2) away from the
bobbin.
3. Tighten the screw (1).
①
②
(2) - Metallic bobbin winder
25