Operation; Switching The Power Supply On And Off - DURKOPP ADLER 281 Operating Manual

Operation

Operating manual 281 Version 06.0 - 05/2013
5 Operation

5.1 Switching the power supply on and off

The controller is underneath the table plate. The main switch (1)
on the controller regulates the power supply.
Figure 2: Switching the power supply on and off
①
②
(1) - Main power switch
(2) - Indicator lamp on the controller
To switch on the power:
1. Press the main switch (1) down to position I.
The indicator lamp (2) lights up.
To switch off the power:
1. Press the main switch (1) up to position 0.
The indicator lamp (2) goes out.
17