Download Print this page

EPV PowerMax Series User Manual

Electric/motorized front projection screen

Advertisement

Quick Links

PowerMax / PowerMax Pro
Electric/Motorized Front Projection Screen
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO extra Black
Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved
changes or modifications (except for cutting the power cord for hardwire installations) to this unit are
prohibited and will void your warranty. For more information, please contact our Technical Support
Department at (877) 511-1211 Ext. 604.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by
the manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven or inclined surfaces.
Do not put heavy objects on the power cord and position it properly to avoid creating a trip
obstacle.
Never overload the power cord to prevent an electric shock or fire due to a loose contact or a
short circuit.
There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by
yourself. No one except authorized technicians can open and make repairs to this unit.
Make sure the power source this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance
to avoid overheat.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
Rev.072512-JA
Series
User's Guide
1
www.elitescreens.com/epv

Advertisement

loading
Need help?

Need help?

Do you have a question about the PowerMax Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EPV PowerMax Series

  • Page 1 Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty.
  • Page 2: Installation Warning

    The instructions provided in this user’s guide are for reference only. Please consult a professional installation company for further installation and safety advice. The installer must insure that proper mounting hardware is used to provide adequate strength suitable for the installation. Elite Screens is not liable for any faulty installations.
  • Page 3: Installation Instructions

    Bubble Leveler Installation Instructions Please consult a professional Installer. Elite Screens is not liable for faulty installations. Flush Mount to the Wall 1. Mark the location of where the screen is to be installed, drill your holes, and insert the M10 Anchors (c).
  • Page 4 Mounting Bracket Mounting Bracket Mounting Bracket Fix Plate 1 Fix Plate 2 Case Slot 1 Case Slot 2 Screen Case Flush Mount to the Ceiling 1. Mark the location of where the screen is to be installed, drill your holes, and insert the M10 Anchors (c).
  • Page 5 Loop Holes Built in 3 Way Control Switch 1. The PowerMax Series comes with a 3 Way Control Switch attached to the Power Cord, which is 3.5 meters in length. 2. Use the provided Bubble Level (f) to ensure the screen is leveled before plugging in the power cord.
  • Page 6 Release Tab Pull Bottom of case first away from wall/ceiling. ZPM-RT Optional Remote Control Kit for PowerMax Series (Standard for PowerMax Pro) Please contact Elite Screens to purchase the optional ZPM-RT Remote Control Kit. F. In-wall RJ45 module 55” Red+...
  • Page 7 ZPM-RT Installation & Control Instructions 2 Please consult a professonial installer for this procedure. Elite Screens is not responsible for faulty installations. 1. Cut the cable of both the Wall Box (G) and the attached Control Switch to expose the wires.
  • Page 8 2. Connect the wires from the screen to the Wall box (G) according to their specific color. Purple Wire = Up Orange Wire = Down Yellow Wire = Common Yellow & Green Wire = Ground Purple Wire = Up Orange Wire = Down Yellow Wire = Common Yellow &...
  • Page 9 1. Connect the IR Eye Receiver (F) to the Wall Box (G) for high wall or ceiling installations Wall Box (G) IR Remote (A) IR Eye Receiver (F) For a local Elite Screens contact or Technical Support, please visit www.elitescreens.com Rev.072512-JA www.elitescreens.com/epv...

This manual is also suitable for:

Powermax pro series