EPV Marquee Tension Series Installation Manual

Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
In order for the screen material to maintain its projection qualities and optimum performance, please refer to the list
below for proper maintenance and cleaning.
•
Use a dry microfiber cloth to remove dust from the screen's surface.
•
When cleaning, use a damp microfiber cloth with warm water to remove any marks.
•
Never rub or apply pressure when cleaning the surface.
•
Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
•
To avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils or any other sharp
or abrasive objects.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top
Drop in the roller. Unapproved changes or modifications (except for cutting the power cord for hardwire
installations) to this unit are prohibited and will void your warranty. For more information, please contact our
Technical Support Department at techsupport@epvscreens.com
• Please retain this user's guide for future reference.
• To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
• Handle the unit carefully during transportation to avoid any damages.
• To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.
• The power outlet supplying power to the unit should be close to the unit and easily accessible.
• Do not install the unit on uneven, inclined surfaces.
• Do not install in damp places to avoid an electric shock or short circuit.
• Do not place any heavy objects over the power cord.
• Position the power cord properly to avoid creating a trip obstacle.
• To avoid an electrical shock or fire, due to a loose contact or short circuit, do not overload the power cord.
• The internal & external parts of this unit are not end user serviceable. Do not attempt to disassemble this unit
by yourself. No one except authorized technicians can open and make repairs to this unit.
• Make sure the power source that this unit is connected to has a continuous power flow.
• If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to avoid
overheat.
• Do not handle the power plug when your hands are wet or your feet are in contact with water.
• Properly dispose of this equipment according to the environmental regulations in your area when product is no
longer of service.
02142023JA
In-Ceiling Electric Tab-Tensioned Projection Screen
Visit
1
Marquee Tension Series
Installation Guide
www.epvscreens.com for the latest updated version
H Type (RC1)
V1
www.epvscreens.com