EPV Power Max Tension ISF Series User Manual

Product Description
The Power Max Tab-Tension ISF Series is an electric projection screen that is designed for rooms with controlled room
lighting. The matte white projection surface is EPV's ChromaWhite ISF which is ISF Certified by the renowned Imaging
Science Foundation for producing accurate colors in a dark room environment.
Screen Maintenance
Dust, dirt and scratches on the projection screen surface will affect the quality and performance of the projection image.
For optimal results we advise to pay attention to the following instructions.
• Use a dry microfiber cloth or soft brush to remove dust from the screen's surface.
• When cleaning, use a damp microfiber cloth with warm water to remove any marks.
• Never rub or apply pressure when cleaning the surface.
• Don't point to the screen material with a fingertip or other sharp objects to prevent damage to the material.
• Don't scratch the material, as it will leave permanent markings on the screen's surface.
• Don't use acetone, benzene, alcohol and any other organic solvents to clean the screen material. Using such chemicals
will permanently damage the screen.
Notes: The following precautions should always be followed to avoid damaging the material, which is not covered
under warranty.
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
CAUTION: Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this
unit are prohibited and will likewise void your warranty. For more information, please contact our Technical Support
Department at techsupport@epvscreens.com.
• Please retain this user's guide for future reference.
• To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the manufacturer.
• Handle the unit carefully during transportation to avoid any damages.
• To ensure safe and reliable operation, make sure the power connection is secure.
• The power source should be close to the unit and easily accessible.
• Do not install the unit on uneven, or inclined surfaces;
• To avoid electrical shock or product damage, do not install this device in a damp place.
• Do not place any heavy objects over the power cord.
• Position the power cord properly to avoid creating a trip hazard.
• Avoid electrical shock or fire, by not overloading the power cord.
• The internal & external parts of this unit are not end user serviceable. Do not attempt to disassemble this unit by
yourself. Consult an authorized technician instead.
• Make sure the power source that this unit is connected to has a continuous power flow.
• If there is need to use an extension cord, make sure said cord has a compatible power rating.
• Do not handle this or any other electrical device if you are wet or standing in water.
• Whenever the screen reaches its end of life, follow local environmental guidelines regarding its proper disposal.
Rev.02142023JA
Power Max Tension ISF Series
Electric Wall/Ceiling Tab-Tensioned Projection Screen
Visit
1
User's Guide – E Type (RC1)
www.epvscreens.com for the latest updated version
__ ____
www.epvscreens.com
V1
_________