EPV Power Max Sonic 2 Series User Manual

Acoustically transparent tab-tensioned motorized projection screen

Advertisement

Quick Links

Power Max Sonic 2 Series
Acoustically Transparent Tab-Tensioned Motorized
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop limit. There is NO extra black-
matte drop material on the roller. Please be aware that altering the vertical limit switch to drop the screen
material off the roller voids your warranty with EPV Screens. Unapproved changes or modifications (except
for cutting the power cord for hardwire installations) to this unit are prohibited and will likewise void your
warranty.
For more information, please contact our Technical Support Department at (877) 511-1211 Ext. 604.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, make sure the power connection is secure.
The power source should be close to the unit and easily accessible.
Do not install the unit on uneven, or inclined surfaces;
To avoid electrical shock or product damage, do not install this device in a damp place.
Do not place any heavy objects over the power cord.
Position the power cord properly to avoid creating a trip hazard.
Avoid electrical shock or fire, by not overloading the power cord.
The internal & external parts of this unit are not end user serviceable. Do not attempt to
disassemble this unit by yourself. Consult an authorized technician instead.
Make sure the power source that this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure said cord has a compatible power rating.
Do not handle this or any other electrical device if you are wet or standing in water.
Whenever the screen reaches its end of life, follow local environmental guidelines regarding its
proper disposal.
04252019JA
Projection Screen
User's Guide
1
www.epvscreens.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power Max Sonic 2 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EPV Power Max Sonic 2 Series

  • Page 1 Please be aware that altering the vertical limit switch to drop the screen material off the roller voids your warranty with EPV Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will likewise void your warranty.
  • Page 2 WARNING Individual modifications to this product are prohibited and will void the manufacturer’s warranty. Please contact the EPV Screens Customer Service Team with any questions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3 Installation Instructions For installation assistance, please consult a professional Installer. EPV Screens is not liable for faulty installations. A. Wall Mount Flush mount (movable position) This mount method allows the screen to slide horizontally. M5x25MM round head cross screws Front view of bracket (A)
  • Page 4 If you would like to adjust the screen tension, please contact EPV Screens for assistance to avoid damaging the screen and voiding your warranty. Power Max Sonic 2 Series | Controls and Accessories A. IR B. RF C. Wall D.
  • Page 5 30seconds for full off and on cycle each time) The back of the Fig 5 projector DC 5-12V out Wireless 5-12V trigger cable Stop Down For more information, technical support or your local EPV Screens contact, please visit www.epvscreens.com 04252019JA www.epvscreens.com...

Table of Contents