Table of Contents
Advertisement
REMOVABLE
KNOBS
MOLDED
RIB
SPRING
CLIP
All control knobs may be removed for easy cleaning by
pulling the knob straight off the stem. Be sure that the
knob is In the OFF position before removal.
Hint: Slip a thin cloth (such as a handkerchief) or a piece
of string under and around the knob edge and pull
straight off.
Caution:
Read these instructions carefully before re-
placing the knobs. Replacing the knobs improperly will
damage the knobs and the spring clips on the stems. If
this happens, the knobs will fit loosely.
To replace the knob:
1. The knob stem has a groove in each side. The
groove on one side has a spring clip. The other
groove is clear (see illustration).
2.
Check the Inside of the knob and find the molded rib.
3.
Replacethe knob by fitting the molded rib inside the
knob into the clear groove on the stem.
Note:
Be sure to replace
knobs
on the correct
stems.
REPLACING
THE
OVEN
LIGHT
S
GLASS
RETAINER
GLASS_
_'@
COVER
Be sure that the light switch is in the off position.
Do not touch
hot oven bulb.
Do not touch oven
bulb with wet hands. Do not wipe oven light area
with wet cloth.
Never touch
the electrically
live collar
on the
bulb when replacing
it.
Electrical
power must be shut off if you have to
replace
a broken bulb.
1. Unscrew glass cover and remove.
2.
Replace the bulb with a 40 watt appliance bulb.
3.
Replace the cover.
Note:
We recommend you use a 40 watt appliance bulb
that is no longer than 3 1/2".
23
NEMNT96
Advertisement
Table of Contents
