Table of Contents
Advertisement
REMOVABLE
OVEN
RACKS
BUMPED-IN
RACK GUIDES
To install:
1. Set the raised back edge of the rack on a pair of rack
guides.
2. Push the rack in until you reach the bump in the rack
guide, then lift the front of the rack and push the rack
all the way in.
To remove:
1. Puilthe oven rack out, then up.
NOTE:
The
racks
are
designed
with
stop
locks.
When
the racks
are
placed
correctly
on the rack
sup.
port
and
extended
from
the
oven,
the stop
lock
prevents
the
racks
from
tilting
when
you
are
removing
food
from the racks
or placing
food
on
them.
REMOVABLE
OVEN
DOOR
BROIL STOP
/
POSITION _._,_
/
/._/-./I _
/
To remove:
1. Open the door to the stop position (see Illustration).
2. Grasp the door at each side and lift up and otf the
hinges. DO NOT lift the door by the handle.
NOTE: When the door is removed
and hinge arms
are at stop position,
do not bump or try to move
the hinge
arms.
The hinges
could snap back
causing
an injury to the hands or damage
to the
porcelain
on the front
of the range.
Cover the
hinges with toweling
or empty
towel rolls while
working
in the oven area.
To replace:
1. Hold the door over the hinges with the slots at the
bottom edge o! the door lined up with the hinges.
The
hinge
arms
must
still
be in the
stop
position.
2; Slide the door down onto the hinges as far as it will
go and close the door.
REMOVABLE
STORAGE
DRAWER
GUIDE STOP
This
drawer
gives
you
space
for
keeping
cookware
and hakeware.
Plastics and flammable
material
should not be kept in this drawer.
Do not overload the storage drawer, if the drawer Is too
heavy, it may slip off the track when opened. To ope nthe
drawer, grasp the center of the handle and pull straight
out.
To remove=
Pull drawer straight out and lift over the
guide stops.
To replace=
Lift over the guide stops and slide drawer
into place,
22
NEMNT116
Advertisement
Table of Contents
