Table of Contents
Advertisement
RANGE
CONTROL
CANCELS
PROGRAM
CLOCK/TIIMER
TEMPERATURE
OVEN OPERATION
STATUS
DISPLAY
DISPLAY
SETAUTOMATIC
OVENOPERATIONS
TO SET
I
TO SET
OVEN OPERATIONS
SELF-CLEAN
CYCLE
1"
UP AND DOWN ARROW PADS
FUNCTION
USE TO INCREASE OR
DISPLAY
DECREASE TIME/TEMPERATURE
PRESS TOTURN
TIMER ON AND OFF
Your range Is controlled with a touch. You now have the
ease of setting the following operations:
CLOCK
BAKE
BROIL
TIMER
DELAY
BAKE
CONVECTION
BAKE
DELAY
CONVECTION
BAKE
CONVECTION
ROAST
SELF
CLEAN
DELAY
CLEAN
The UP or DOWN arrow Is used to set an amount of time
or change the temperature you want to use. By pressing
and holding down either pad the numbering will change
quickly,
By pressing and releasing either pad the
numbering will change slowly.
m
DISPLAY:
Once you have programmed
your control for any
operation, you can display the setting by pressing the
appropriate pad.
For example, if you are using the
TIMER and want to see the time of day, press CLOCK
pad twice. The display will show the time of day.
TONES:
The end-of-cycla tone will sound at the end ot timer use
and automatic oven functions. The end-of-cycle tone is
3 short beeps followed by 1 beep every 6 seconds that
repeat until you press any pad except the UP or DOWN
arrow pad. If you would like to eliminate the repeating
beeps, push and hold CLEAR/OFF
for 10 seconds. To
return the 1 beep every 6 seconds, push and hold
CLEAR/OFF
for 10 seconds.
F-CODE:
If the time display beeps comlnuously and flashes an
"F" followed by a number, you have a function error
code. Note the number after the "F".
Press CLEAR/
OFF. Allow oven to cool for I hour. If problem repeats,
disconnect all power to the range and call for service.
Advise your service technician of the number following
the "F" in the display.
NOTE:
You cannot
set BAKE, BROIL or COOK
TIME while the oven door is in the locked
position.
If you try, the word "DOOR" will
appear
in the display.
The oven door
lock is to be used for Self.Cleaning
only.
9
NCERC30
Advertisement
Table of Contents
