Table of Contents
Advertisement
THE
SELF.CLEAN
CYCLE
(3 HOURS
- NORMAL
CLEAN
TIME)
BEFORE
A CLEAN
CYCLE
1. Remove the broiler pan and grid, oven racks, all
utensils and any foil that may be In the oven. DO not
try to clean utensils or any other objects In the oven
during a self-clean cycle. If oven racks are left in
the range during a clean cycle_ they will darken,
lose their luster
and become
hard to slide.
If
you choose
to leave the racks in the oven, you
can polish the edges
of the racks
with steel
wool and apply a small amount of vegetable
oil
to the rack
edges after
the self.clean
cycle.
This will make the racks
easier to slide.
2. Soil on the oven front frame, under the front edge of
the cooktop, the door liner outside the door gasket
and the front edge of the oven cavity (about 1" Into the
oven) will not be cleaned during a clean cycTe (see
Illustration below). Clean these areas by hand before
starting a clean cycle.
Use hot water with a soap-filled steel wool pad. We
recommend a cleanser such as 'Soft Scrub®' brand
or a similar cleaning product to keep white surfaces
looking clean and new. After cleaning, rinse well to
help prevent a brown residue from forming when the
oven Is heated. Buff these areas dry with a dry cloth.
Please
Note:
The door gasket
is designed
to have a 5"-6" gap
at the bottom
of the oven door.
This is to allow
for proper air circulation.
DOOR PANEL
GASKET
TO SET
A SELF.CLEAN
CYCLE:
1. Slide the door lock handle to the right Into the lock
position.
DO NOT force the handle. You may also
need to lightly press on the door to lock It properly.
TO LOCK:
OVEN LIGHT -
To prolong the life of the bulb, be sure
the oven light is OFF during Self-Clean.
FRONT FRAME
2. Push the CLEAN
pad.
The display
will show
UCLEAN", "TIME",
and (-...).
DOOR LINER
3. Press the UP or DOWN
arrow pad to select the
amount of time you want the oven to clean.
The
normal cycle is 3 hours, but you can choose between
2 and 4 hours.
3. Wipe up heavy spiilovers on the oven bottom. Too
much soil may cause smoking during the clean cycle.
4. Do not rub the door gasket. The fiberglass material of
the gasket has an extremely low resistance to abrasion.
An intact and well fitting oven door gasket is essential
for energy efficient oven operation and good baking
results.
If you notice the gasket becoming worn,
frayed or damaged In any way or if It has become
displaced on the door, you should replace the gasket,
You can press the STOP TIME pad to see the time of
day the clean cycle will be finished. Push the CLEAN
pad to return to the countdown.
Make su re your oven light is off during a self-clean cycle
to prolong the life of the bulb.
18
NESCL66
Advertisement
Table of Contents
