Table of Contents
Advertisement
o If the hob is positioned so that the right or left hand side of the
appliance will be near to the edge of a kitchen unit. There must be
a gap of at least 200 mm between the side of the hob and the
vertical surface of any kitchen unit that is made of a combustible
material. If the vertical surface is made of a non-combustible
material, then 50 mm clearan
space must be allowed for saucepan handles to be turned and for
saucepans to be used safely.
o 400 mm between the hob surface, providing that the underside of
the horizontal surface is in line with the outer edge of the hob. I
the underside of the horizontal surface is lower than 400 mm, then
it must be at least 50 mm away from the outer edges of the hob.
Unpacking the appliance
W
hen unpacking the appliance please check that the following items
are contained withi
1 x Baumatic hob
Pan stands
Burner assemblies
Instruction ma
nual
Baumatic
warranty card
Fixing screws
Clamps
Sealing strip
LPG conversion jets
S
elf-adhesive label for amending the gas category on the appliance's
r
ating plate (required if the LPG conversion jets are used).
Installing the appliance
Cut a hole in the worktop that corresponds with the relevant
o
drawing for your hob on the next page.
ce is sufficient. HOWEVER sufficient
n the packaging:
f
19
Advertisement
Table of Contents
