Subscribe to Our Youtube Channel
Related Manuals for Baumatic BG2.1SS
Summary of Contents for Baumatic BG2.1SS
- Page 1 BG2.1SS 30 cm 2 Burner gas domino hob BG2.1TCSS 30 cm 2 Burner gas domino hob with thermocouples...
- Page 2 User Manual for your Baumatic BG2.1SS 30 cm 2 Burner gas domino hob BG2.1TCSS 30 cm 2 Burner gas domino hob with thermocouples NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
-
Page 3: Table Of Contents
Gas hob surface layout 10 - 12 Using the gas hob Before first use Switching the hob on Automatic ignition (BG2.1SS) 10 - 11 Automatic ignition with flame failure device (BG2.1TCSS) Energy saving tips 11 - 12 12 - 13... -
Page 4: Environmental Note
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment. -
Page 5: Important Safety Information
No modifications to the appliance are permitted by Baumatic Ltd. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made... - Page 6 Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the applian ce at any time. During and after use, all surfaces will be hot. o If it is necessary for younger family members to be in the...
- Page 7 British Standards. Please see the specific sect ion of this booklet that refers to installation. o Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance.
-
Page 8: Specifications
BG2.1SS/ BG2.1TCSS Product dimensions: Aperture dimensions: Height: 510 mm Height: 490 mm Width: 288 mm Width: 268 mm Depth: 40 mm Product specifications: o 1 x 3.00 kW rapid burner o 1 x 1.00 kW auxiliary burner o Front control operation... -
Page 9: Electrical Details
lectrical details 230 Vac 50 Hz Rated Voltage: 3 A (double pole sw itched fused outlet with Supply Connection: 3mm contact gap) 0.008 to 0.02 kW (depending on model) Max Rated Inputs: 3 core x 0.75mm² (Type RR-F <HAR> marked) ains Supply Lead: as details Rp ½... -
Page 10: Using The Gas Hob
The symbol on the control panel, nex t to the control knob will indicate which gas burner it operates. Automatic ignition (BG2.1SS) To ignite a burner: o Press in the control knob of the burner that you w ish to light and turn it anti-clockwise to the maximum position. -
Page 11: Automatic Ignition With Flame Failure Device (Bg2.1Tcss)
o In case of power failure, the burners can be lit by carefully using a match. Automatic ignition with flame failure safety device (BG2.1TCSS) The appliance is fitted with a flame failure safety device on each burner, which is designed to stop the flow of gas to the burner head in the event of the flame going out. -
Page 12: Cleaning
o The burner flame must never extend beyond the diametre of the pan. o Use flat bottomed pans only o When possible, keep a lid on the pan whilst cooking. o Cook vegetables with as little water as possible, to reduce cooking times. -
Page 13: After Each Use
After each use o Remove the pan stands and wipe the appliance over with a soft, damp cloth that has been put into warm soapy water. The cloth should be wrung out after being taken out of the soapy water. o Dry the appliance by rubbing the surface with a soft, clean cloth. -
Page 14: Installation
BS 5482 Installation of Domestic LPG Appliances) o BS 5440 Installation of Flues and Ventilation for Gas Appliances o Baumatic Ltd. Installation Instructions Positioning The adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the ambient temperature of the room it is located in, during periods of use. -
Page 15: Unpacking The Appliance
50 mm clearance around the appliance and between the hob surface and any combustible materials. Unpacking the appliance When unpacking the appliance please check that the following items are contained within the packaging: 1 x Baumatic hob Pan stands Burner assemblies Instruction manual Baumatic warranty card... -
Page 16: Installing The Appliance
Installing the appliance o Cut a hole in the worktop that corresponds with the drawing above. o IMPORTANT: You must have a gap of at least 25 mm between the underneath of the appliance and any surface that is below it. o Carefully turn the hob upside down and place it on a cushioned mat. -
Page 17: Gas Connection
o Do not leave a gap in the sealing agent or overlap the thickness. o IMPORTANT: Do not use a silicon sealant to seal the appliance against the aperture. This will make it difficult to remove the hob from the aperture in future if it needs to be serviced. Sealing strip Clamp Screw... -
Page 18: Ventilation Requirements
Conversion for use on LPG and other gases must only be undertaken by a qualified person. For information on the use of other gases, please contact the Baumatic Advice Line. o The hob must be installed by a qualified person, in accordance... -
Page 19: Gas Safety (Installation And Use) Regulations
o Prolonged intensive use of the appliance may call for additional ventilation, either by the opening of a window, or by increasing the level of the mechanical ventilation device (where present). o This hob is not fitted with a device for discharging the products of combustion. -
Page 20: Gas Adjustment (Conversion To Lpg)
o The elbow MUST be pointing in a downwards direction. o Gas pressure may be checked on a semi-rapid hob burner. Remove the appropriate injector and attach a test nipple. Light the other burners and observe that the gas pressure complies with the gas standards in force. -
Page 21: Minimum Flow Adjustment For Hob Gas Taps
GENERAL INJECTORS TABLE Kind of gas Nozzle Burners Power (in watts) mm/100 Max. Min. 3500 1700 Natural Rapid 3000 Semi-rapid 1750 Auxiliary 1000 3500 1700 L.P.G. Rapid 3000 Butane Semi-rapid 1750 Propane Auxiliary 1000 o Reassemble all the burners carefully; in particular you should make sure that the flame spreader is correctly placed on the burner. -
Page 22: Gas Tap Maintenance
o For butane/propane gas, the adjusting screw must be tightly screwed in. o Refit the control knob. o Make sure that the flame does not go out by quickly turning from maximum flow to minimum flow. If it does then remove the control knob and make further adjustments to the gas flow, testing it again once the adjustment has been made. -
Page 23: Electrical Connection
Replacing the mains supply cable If the mains supply cable is damaged, then it must be replaced by an appropriate replacement which can be obtained from the Baumatic Spares Department. The mains supply cable should be replaced in accordance with the following instructions: o Switch the appliance off at your mains supply. -
Page 24: My Appliance Isn't Working Correctly
Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the warranty card that you receive with the appliance. -
Page 25: Contact Details
Czech Republic United Kingdom Baumatic CR spol s.r.o. Baumatic Ltd., Průmyslová zóna Sever 696 Baumatic Buildings, 460 11 Liberec 11 6 Bennet Road, Czech Republic Reading, Berkshire RG2 0QX +420 483 577 200 United Kingdom www.baumatic.cz Sales Telephone (0118) 933 6900...
Need help?
Do you have a question about the BG2.1SS and is the answer not in the manual?
Questions and answers